Method 2: TESP and OEM Chart
| TESP | Rating | Comments |
|---|---|---|
| Overall Value |  |
Cost-effective method, provides good measurement on new clean systems with proper OEM chart. Is not accurate if system is dirty. |
| Recognized by Standard 310 | Yes | Recognized by ANSI/ACCA/RESNET. |
| Residential Accuracy |
 |
Good accuracy if using on new systems with right OEM table. Per 310: Accuracy of +/- 1% of the reading or +/- 0.25 Pa (0.001 inH2O) required for manometer, whichever is greater. |
| Consistency |  |
Inconsistent readings if condition of equipment is not clean (matching the OEM table). |
| Equipment Cost |
$ | Cost effective, can start very low (<$100, to about $600). |
| Time (Min) | 5 to 10 | Process is straightforward. NCI is a good resource for this method. |
Meets Standard 310
Does not meet standard 310.